Previous : Sulphur Content Tester(Lamp Method)
- Product Introduction
Application :
It is suitable to determine the the amount of carbon residue of petroleum products.
Main technical features
Structure |
adopts all-in-one structure. It consists of two parts: electrical control chamber and high temperature heating furnace. The design is simple and reasonable. |
Controlling |
single chip machine system. The instrument controls the whole procedures automatically according to program preset. |
The screen |
adopts all English interface. Operator can do determination by prompts on the screen even no need to read the operation manual. Easy to operate. |
Automatic test |
It controls the flow rate of nitrogen, temperature heating rate and preset temperature automatically. Easy to adjust the flow rate. The heating rate is accurate and temperature control is stable. |
Test data analysis |
It collects test data and calculates results automatically. It can print and save the data according to customer’s requirements. |
measurement range |
0.10%(m/m)~30.0%(m/m). The test result is equivalent to Conradson method if the carbon residue is higher than 0.10%(m/m). |
Extended test |
can also be used to determine the petroleum products composed of distillate oils which carbon residue is lower than 0.10%(m/m). But the specimen shall be sampling to 10%(V/V)distillation residue according to GB/T6536 firstly. |
High weight balance |
It equips a electric balance to achieve the automation of sample weighing and data input. |
Contact Us
ATTN:SILVIA WANG
CELL PHONE:86-18017451829
Wechat ID:+86 18017451829
Factory Address: NO 7628 ,ZHONGCHUN RD, SHANGHAI CHINA(BUSINESS CENTRE OF YOUFANG BUILDING )
Tel:86-21-31001850-806
Fax:86-21-61294230
Email: SX01@SXTESTER.COM